Electronic Components

You are involved in the design, manufacturing or sourcing of electronic components. You need the right components for your application delivered when you need them. Heynen works together with first class passive component manufacturers to help you achieve your goals.

Please download our linecard

Solutions

  • Decoupling and filtering of RF Signals and noise
    Decoupling and filtering of RF Signals and noise

    The new V Series capacitors deliver increased broadband rejection in a significantly reduced footprint for bypass capacitor filtering networks.  Released under the DLI brand from Knowles Precision Devices, this cost-effective capacitor line is built on a compact 30 mil by 30 mil footprint.  This superior RF signal blocking design tool will solve the needs of design engineers looking to decouple RF signals from DC bias lines in active circuit designs, such as MMICs, or filter out noise from switching power supplies.

     

  • Read your sensing elements directly by using the Smartec UTI
    Read your sensing elements directly by using the Smartec UTI

    The Universal Transducer Interface (UTI) is a complete analogue front end for low frequency measurement applications, based on a self-calibrating period-modulated oscillator. Sensing elements can be directly connected to the UTI without the need for extra electronics. Only a single reference element, of the same kind as the sensor, is required. The output is digital and can communicate with any type of micro-controller.

    The UTI provides interfacing for all kind of resistive and capacitive sensors.

  • A position test at very limited space by using a probe
    A position test at very limited space by using a probe

    A position sensor system is the ideal solution for exact measurement and documentation of pin lengths, hole depths etc. This system can be used like a contact probe even in small centers. An integrated potentiometer allows the exact determination of the position of the DUT.

More...

Blog

  • Ceramic Technology offer 10nF Safety Certified MLCCs
    Ceramic Technology offer 10nF Safety Certified MLCCs

    MLCC’s have been used in automotive applications for years, but the big change being seen is the voltage rating and size of components now being used.  This new revolution in MLCC technology, used in control electronics, is being driven by modern on-board charging systems - PHEV & EV where mains ac is involved.  Knowles brand Syfer has responded to demands by increasing its range of 250V ac X1/Y2 Safety Certified capacitors to 10nF.

  • Current measurement system designed for high dielectric strength
    Current measurement system designed for high dielectric strength

    IVT-S: Designed for high dielectric strength in traction batteries and stationary energy storage devices

    With its newly developed, shunt-based IVT-S measurement technology, Isabellenhütte is responding to the market, which now favours specified functions in current measurement systems. The main focus is on achieving dielectric strength that is as high as possible in line with the intended application. High dielectric strength must be guaranteed in battery-powered vehicles, for example.

  • Knowles Capacitors update
    Knowles Capacitors update

    In 2014 Dielectric Laboratories (DLI), Novacap, Syfer Technology and Voltronics came together into a single organisation, Knowles Capacitors. With a combined history exceeding 175 years, and operating as a division of Knowles Corporation of USA, Knowles Capacitors was a merging of some of the world’s leading speciality capacitor manufacturers. The Precision Devices division of Knowles is a $200m+ global manufacturer of precision capacitors, components and crystal oscillators.

More...

Suppliers

Events

More...