Heynen

Heynen works for innovators.

METZ CONNECT Right Angle X-Code M12

METZ CONNECT Right Angle X-Code M12

Jack M12 solderable 90° 8-pole X-coded IP67

The METZ Connect right angled X-coded printed circuit board family impresses with its diverse application possibilities. Standard available in a versions that adapt wall thicknesses from 1-2.5 mm. Up on request you can go up to 4 mm and 5 mm, which gives you design flexibility. The integration in sheet metal as well as die casting is possible without any problems.

 

By using this angled M12 with a 9 pin through board soldering and extra mechanical strength on the board.  In order to do justice to the different manufacturing processes on the market, they are also available in different dosage forms. As a pure circuit board insert that only becomes a connector with the housing of the application, or as a kit and completely assembled. The entire family is THR solderable in order to meet the highest demands here as well.

 

Well mounted this connector correspond with the DIN EN 61076-2-109 standard and can transmit data rates of up to 10 Gbit. This is achieved using length-compensated contacts. And together with the Metz Connect  X plug assemblies it goes up to a IP67 protection in a mated condition.

In addition, the family is completely provided with a shield plate, which reduces or eliminates any RF-technical influence on components on the circuit board. This, too, can guarantee a trouble-free data flow and data quality.

Despite all the complexity that the component has internally, the design is very compact and requires an extremely small footprint.

 

Advantages

  • Angled 90°
  • Wall thickness up to 5mm
  • 10Gbit Ethernet
  • IP67 in mated condition
  • THR solderable
  • Fully Shielded

  • Share:

Our expert(s):

Johan De Ceuster Johan De Ceuster
Please contact Johan with any questions or business opportunities relating to Electronic Components and RF. We love to be involved in developing new solutions and bringing these to the Belgian and Luxembourg market. johan.de.ceuster@heynen.be
+32 (0)11 60 09 10

Marcel van Venrooij Marcel van Venrooij
Please contact Marcel with any questions or business opportunities relating to Electronic Components. We love to be involved in developing new solutions and bringing these to the Dutch market. marcel.vanvenrooij@heynen.nl
+31 (0)485 55 09 18

Events

digitalPMRExpo 2020 / online

Event date: 24 November 2020 / 26 November 2020
Read more

#
SPS virtual, Nuremberg

Event date: 24 November 2020 / 26 November 2020
Read more

#
RF Technology Event 2020, digital

Event date: 1 December 2020 / 3 December 2020
Read more

#
LED+ELEKTRO, Brabanthallen Den Bosch

Event date: 3 November 2021 / 4 November 2021
Read more

#

Heynen is proud to work with