Electronic Components Solutions

XY-receiving and Z-transponder coil for comfort and safety applications: Highest sensitivity and Q

XY-receiving and Z-transponder coil for comfort and safety applications: Highest sensitivity and Q

When developing for example a keyless entry, immobilizer or TPMS-systems you're looking for a highly sensitive RFID transponder coil which fulfils the strongest quality requirements.

    KOA transponders

  • For these kinds of comfort and safety applications, KOA introduces transponder coils with an innovative design and a typical application frequency in the range of 125 kHz. Data can be exchanged in a contactless system which consists of the transponder and the reader and is wear-free. The transponder coil is part of the coupling device and acts as the antenna. In passive transponders, the induced energy can be used as power instead of a battery. In active transponders the voltage is used to wake up the circuit and to use its internal battery.

  • Portfolio

  • KOA has expanded its inductor portfolio by adding the KT11835 and the KTZ1030 transponder coils. The XY-receiving transponder coil and the Z-transponder coil are optimized for the high requirements of the automotive industry. Key features of the KOA transponder coils are the high mechanical reliability with 4 terminals, high Q and excellent sensitivity up to 75mV/μT in the low-frequency region around 125 kHz. Both series are AEC-Q200 qualified and meet EU-RoHS requirements. The 4 terminals of KOA's molded KT11835-series are positioned on the sides and don't interrupt the magnetic flux. The part withstands horizontal mechanical load of more than 100N and shows the highest level of sensitivity. The Z-axis transponder coil KTZ1030 with its 10x10mm size and only 3.2mm max. height was especially optimized for the mechanical and electrical demands of RFID design.

  • Application examples

  • RF-ID Automobile industry, Passive keyless entry/start, Smart-key (inside key), Immobilizer, TPMS-system, Logistics (e.g. tracking devices), Security systems (e.g. access control), Animal identification (e.g. feeding) Agriculture, Medical engineering,

  • Main Advantages

    Highest sensitivity and Q due to optimized magnetic material and special electrode structure
  • 4 terminals ensure strongest mechanical stability
  • Contactless, wireless identification
  • Reliability conforming to automotive requirements
  • Customized inductance values on request
  • Higher SRF than other coils of the same size

Related Solutions

  • Is reliability and enhanced terminal strength essential in your power application

    KOA's WK73-series has a 90° rotated design and offers several advantages compared to standard resistor footprints. A three times higher power rating in case of 0612 vs 1206 size is the most visible. This can save board space and is based on the improved heat dissipation through the solder joints. Much higher terminal strength is related to the bigger soldering area. The lower distance between the terminals, results in less expansion stress to the solder joints. The inner resistive pattern causes less temperature rise. All the above mentioned benefits combined, result in a superior reliability compared to standard flat chip resistors. The lower distance between the terminals, results in less expansion stress to the solder joints. The inner resistive pattern causes less temperature rise. All the above mentioned benefits combined, result in a superior reliability compared to standard flat chip resistors.

Supplier

  • Koa

    KOA of Japan is reputed for their high quality passive components ranging from Resistor products, PTC & NTC Themistors, Thermal Sensors, Inductors (Chip & Wire wound), Choke Coils, Toroidal Coils and Noise Suppression Components Micro Fuses

Related Blog messages

  • Fully customized LTCC multilayer ceramic substrates from KOA

    KOA's LTCC package is multilayer ceramics for various appliations including high density module, high frequency module, semiconductor interposer and cavity package. Hybrid IC enables downsizing and readily model changing as well as reduces inspection.

  • KOA's Linear Thin Film PTC Resistors

    KOA’s SMD thin film thermosensitive resistors have a linear positive temperature coefficient and are perfect for temperature sensing, control and compensation. The nickel based PTC thin film element on an alumina substrate ensures high stability over the entire temperature range.

  • KOA Europe Updated Selection Guide

    KOA Europe has updated the "KOA Europe Selection Guide". It shows their main product portfolio with short product descriptions and it's key characteristics. New parts are especially marked in red. KOA offers a wide range of passive components.

  • KOA's 1.5W Metal Plate Current Sense Resistors in 1206 Size

    KOA's TLR2BP is a metal plate resistor that provides excellent dimension accuracy and low height with a thickness as low as 0.6mm. In addition, it offers superior corrosion and heat resistance with an operating temperature of -65ºC to +170ºC.