Electronic Components Blog

Monday, 11 July 2016 10:08

Vectron Low G-Sensitivity OCXO

Vectron Low G-Sensitivity OCXO

The OX-407 Low g-sensitivity Oven Controlled Crystal Oscillator is housed in a compact 14x20mm dual inline package with g-sensitivity performance as low as 0.07ppb/g. Covering the frequency range of 10MHz to 50MHz and a phase noise floor of -150dBc at 100kHz offsets, this OCXO provides design engineers with limited board space a small form factor alternative without sacrificing overall performance in their design.

• Standard frequencies: 10, 12.5, 20, 25,40 and 50MHz 
• Phase noise: -150dBc/Hz at 100kHz offset 
• g-sensitivity: as low as 0.07ppb/g 
• Package: 14 x 20mm DIP 
• Temperature stability: 100ppb -40 to 70oC

• Military radar 
• Instrumentation and test equipment 
• Missile systems 
• Signal intelligence 

Please contact your Heynen rep. for more (purchasing) information.

Related Solutions

  • Real-Time and Reliable Viscosity Measurements wherever you are

    You are a maintenance engineer and/or responsible for quality control and in your job you deal with oil, printing inks or any other kind of fluid. What matters to you is the monitoring of the condition of these fluids, especially its viscosity. You have several methods to measure the viscosity, but do these methods allow you to take action whenever it is needed? Or can they be set up in matter of minutes?

  • We can sense it

    If you need to measure temperature and/or viscosity of liquids, Sengenuity can offer you the solution. The technology of acoustic wave sensors is based on the piezo electical principle. The basic material for this is quartz.

Related Blog messages

  • Vectron OCXO's Available to +95ºC

    Expansion of Extended Temperature OCXOs...
    The OX-400/401 and the MD-403 are the latest additions to the OCXO extended temperature range product family. Stabilities of +/-5ppb (OX-400/401) and an uncorrected stability of +/-10ppb (MD-403) are achieved while operating across a temperature range of -40 to 95℃.

  • Vectron's Small Form Factor Tight Stability TCXO

    Vectron’s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature compensated oscillator. It's operating off a 3.3, 2.8, 2.5 or 1.8 volt supply in a hermetically sealed 2.0 x 1.6 mm ceramic package.

  • Vectron's Smallest High Temperature VCXO

    Extended Temperature Range of -55C to 180C in a 5mm x 7mm Footprint. 
    The VX-708 High Temperature Voltage Control Crystal Oscillator has a 4-point mount design for high shock and vibration environments. This VCXO performs over an extended operating temperature range of -55C to +180C with a frequency range of 2MHz to 40MHz while providing an absolute pull range of +/-50ppm making it ideal for harsh environmental applications.