Electronic Components Blog

Friday, 27 May 2016 10:28

Ultimate thinness for an NTC thermistor

Ultimate thinness for an NTC thermistor

The Semitec JT Thermistor is a ultra-thin, high precision radial thermistor with superior electrical insulation. Featuring an ultra-thin 500µm design, the Thermistors of the JT-Series enable designers to measure temperature in very tight spaces such as between the electrodes of battery packs.

 

The JT-W-Series thermistor is a miniature thin-film temperature sensor with a minimum length of 11.5 mm (8mm film length). 
The operating temperature range is -50⁰C to +125⁰C and these NTC's offer a approximate response time of 5 seconds.
Semitec's JT thermistors are fully compliant with RoHS DIRECTIVE2011/65/EU.


Samples are available upon request.


Rating:

Semitec JT and JT-W Termistor rating

Dimensions:

Semitec JT and JT-W Termistor dimensions

Part number:

Semitec JT and JT-W Termistor part number

Related Solutions

  • E-Bikes Brake detection

    E-bicycles are extremely popular. Whether cutting back on carbon emissions or fuel costs, e-bicycles offer many green advantages with similar comforts of conventional bikes. Simple maneuverability and parking are particularly critical if your every day drive is to a congested city. While e-bicycles have been around since the late 1800’s, recent popularity, government regulations and the advent of new sensor technologies have fueled new improvements.

  • Read your sensing elements directly by using the Smartec UTI

    The Universal Transducer Interface (UTI) is a complete analogue front end for low frequency measurement applications, based on a self-calibrating period-modulated oscillator. Sensing elements can be directly connected to the UTI without the need for extra electronics. Only a single reference element, of the same kind as the sensor, is required. The output is digital and can communicate with any type of micro-controller.

    The UTI provides interfacing for all kind of resistive and capacitive sensors.

  • A position test at very limited space by using a probe

    A position sensor system is the ideal solution for exact measurement and documentation of pin lengths, hole depths etc. This system can be used like a contact probe even in small centers. An integrated potentiometer allows the exact determination of the position of the DUT.

  • Current and voltage measurement in and around hybrid and electric drives

    No matter if you're designing a hybrid, electric or fuel cell powered application - a new development's sustainability always depends on the reliability in every-day use and therefore on controlling its energy flow and consumption permanently. Not every method for measuring current and voltage is able to fulfill each of the difficult requirements. Isabellenhütte has developed the current and voltage measuring module IVT for DC applications in alternative drive concepts based on its experience in the area of car battery management.

     

     

Supplier

  • Semitec

    "Thermistor" is the generic name given to thermally sensitive resistors.Negative temperature coefficient thermistor is generally called as thermistor. Thermistor is a semiconducting ceramic resistor produced by sintering the materials at high temperature and made mainly from metal oxide

Related Blog messages

  • A step forward in measuring temperatures

    The temperature sensor SMT172 has been introduced successfully to the market and is really a stepforward in measuring temperatures. Not only the accuracy of 0.1 °C but also the resolution is better than 0.1 mK. The output is , as expected from Smartec, fully digital. These features and the low power makes the sensor suitable for all kind of “lab on a chip” applications and bioreactors.

  • Standex Meder - Alternative Energy Reed Relays, Sensors, And Magnetics

    Reliable And Energy Efficient Electro-Magnetic Components for Isolation Control and Smart Grid Applications.
    Standex-Meder Electronics, a leading manufacturer of precise, reliable, and longlasting sensors and magnetic components worldwide, provides a range of products for use in the Alternative Energy market. Standex-Meder Electronics offers reed relays and switches that are ideal for high voltage and isolation applications for photovoltaics and solar power. They also serve in efforts for the smart grid and smart metering functions related to measuring utility usage, custom power supply, and distribution magnetic products.