Electronic Components Blog

Friday, 10 June 2016 07:26

Spinner New Fiber Optic Rotary Joints Brochure

Spinner New Fiber Optic Rotary Joints Brochure

The new SPINNER Rotating Solutions Fiber Optic Rotary Joints Brochure showcases some major design advancements in the SPINNER Single and Multichannel portfolio. The new single-channel SPINNER FORJ 1.14 comes with an outer diameter of just 14 mm, specifying a < 1.0 dB insertion loss.

As an additional highlight, the brochure also presents the pressure compensated single-channel SPINNER FORJ 1.17 pc for deep sea applications. Where the roughest of environments are a reality, the multichannel SPINNER FORJ x.65 accommodates up to 20 channels – and now comes in a sea water resistant IP65 design. SPINNER is one of the leading manufacturers for high performance rotary joints worldwide. In particular fiber optic rotary joints require a high quality optical and mechanical fabrication environment. This qualifies SPINNER as integral supplier for fiber optic rotary joints. We provide the precision mechanics and all the optical parts from a single source. Beyond this, SPINNER can offer combinations of fiber optic rotary joints together with RF rotary joints, non-contacting power transmission modules, slip rings, media joints or non-contacting data transmission. In particular, SPINNER focuses on the combination of data and power transmission solutions with small form factor.

Customized Fiber Optic Rotary Joints

The SPINNER FORJ Portfolio allows flexible adoption to your requirements such as:

• Special fibers                      • Extended fiber length
• Up to 52 channels               • Extended wavelength range
• Particular labeling               • Adapted flange concept
• Mixed fibermode assembly, e.g. mulit-mode and single-mode fiber, in multi-channel FORJ
• Customized insertion loss values
• Insertion loss bands over different channels
• Special outgoing goods inspections with measurement of specific parameters

Feel free to configure your product with the according order numbering nomenclature for single-channel FORJ on page 6 and multi-channel FORJ on page 9 of the new brochure.

Please contact your Heynen rep. for ordering and more information.

Related Solutions

  • Broadband Network Operator? SPINNER Antenna Monitoring System!

    As a broadband network operator, you need to rely on your systems to deliver content to your subscribers. Early or even premature failure detection is key in preventing downtime and or outage. Spinner’s AMS is engineered to detect flaws in broadcast transmission infrastructure, and alert you to the problem before the damage is done.

  • Spinner 4.3-10 for next-generation mobile comms

    Spinner has teamed up with other leading vendors to define the next generation connector system for the mobile communication industry

    The new 4.3-10 connector system can be installed without tools, and is therefore available with screw, hand-screw and a push-pull coupling mechanism.

    The 4.3-10 connector has a very compact design which allows equipment manufacturers to have a higher connector density on their devices with a performance up to 500W at 2 Ghz.

    Spinner has developped a wide 4.3-10 portfolio  based on their high quality standards providing their customers with the best possible connectivity, optimized and failure free installation, even under the toughest environmental conditions 

     

  • SPINNER MNCS® - Mobile Network Combining System

    For the multiple use of outdoor antenna systems and for in-house coverage it is necessary to combine signals from mobile communication base stations of several operators and networks in the frequency range from 380 to 2,500 MHz. For these purposes SPINNER offers individual components as well as complete, fully tuned and ready-to use systems called POI (point of interconnection).

Supplier

  • Spinner

    The SPINNER Group has been setting standards with its RF technology products for more than 65 years. Spinner's claim in one phrase therefore is: HIGH FREQUENCY PERFORMANCE WORLDWIDE. Spinner HF-connectors and cable assemblies are used world-wide in a large variety of communication facilities. Typical applications are mobile communication base stations, radio relay or radar installations, radio and television transmitter stations, or in medical technology.

Related Blog messages

  • SPINNER Active in NGMN Task Force on 4.3-10

    NGMN has created a 4.3-10 task force with the goal of introducing the new 4.3-10 connector system to the market. SPINNER is an active member of this task force, in which it is drawing on the experience it gained while helping to develop and roll out 4.3-10 to energetically support this NGMN initiative.

  • SPINNER Low PIM Switches

    There are zillions of switches out there. But when it’s about low PIM testing, the available options boil down to just a few. And if you want to use a switch in a calibrated test system and need it to keep working perfectly through hundreds of thousands of cycles without requiring any maintenance, there is really only one choice: the SPINNER low PIM switch.

  • Spinner - Success With Precision

    Wherever possible, SPINNER relies on precision, highly-integrated components, which combine many functions and are made up of minimal parts, thus minimizing the number of connections. This technology allows very good insertion loss values to be achieved, as a lower num-ber of transition resistances also arise at the connections which have been reduced to a minimum. But the main advantage is that the precision increases due to the lower number of fits, meaning the produced components can be created in good compatibility with the simulated geometries.