Electronic Components Solutions

Spinner 4.3-10 for next-generation mobile comms

Spinner 4.3-10 for next-generation mobile comms

Spinner has teamed up with other leading vendors to define the next generation connector system for the mobile communication industry

The new 4.3-10 connector system can be installed without tools, and is therefore available with screw, hand-screw and a push-pull coupling mechanism.

The 4.3-10 connector has a very compact design which allows equipment manufacturers to have a higher connector density on their devices with a performance up to 500W at 2 Ghz.

Spinner has developped a wide 4.3-10 portfolio  based on their high quality standards providing their customers with the best possible connectivity, optimized and failure free installation, even under the toughest environmental conditions 


    4.3-10 Connectors

  • The Spinner 4.3-10 Connector portfolio is available as multifit connector with male-female screw type. The fized versions are available as bulkhead or 4-hole flange (RG401/402, inner connector M3 and Innerconnector with solder cup. Especially for connecting in the currently 7/16 and N system based installations, adaptors are available in screw,hand-screw,push-pull and bulk-head versions. This enables the introduction of 4.3-10 in existing installations without the need for modifications

  • 4.3-10 Modules

  • On the module side Spinner has now the availability of Coaxial loads for IM tests, Standard Coaxial Loads & Attenuators, Couplers & splitters, Coaxial symetrical and unsymectrical splitters all equipped with the new 4.3.10 connector

  • 4.3-10 Interconnect

  • The Spinner Jumper portfolio has been expanded with a full range of 4.3-10 jumpers. Most jumpers in your system can be replaced by the new 4.3-10 connection standard and if the base-station or antenna side has been upgraded to 4.3-10 you can easily replace the existing jumpers by 4.3-10 based jumpers

  • Main Advantages

    Compact Size
  • High Performance
  • Quick manual mounting
  • Wide portfolio available now!!
  • No tooling needed
  • Flexible

Related Solutions

  • Broadband Network Operator? SPINNER Antenna Monitoring System!

    As a broadband network operator, you need to rely on your systems to deliver content to your subscribers. Early or even premature failure detection is key in preventing downtime and or outage. Spinner’s AMS is engineered to detect flaws in broadcast transmission infrastructure, and alert you to the problem before the damage is done.

  • SPINNER MNCS® - Mobile Network Combining System

    For the multiple use of outdoor antenna systems and for in-house coverage it is necessary to combine signals from mobile communication base stations of several operators and networks in the frequency range from 380 to 2,500 MHz. For these purposes SPINNER offers individual components as well as complete, fully tuned and ready-to use systems called POI (point of interconnection).


  • Spinner

    The SPINNER Group has been setting standards with its RF technology products for more than 65 years. Spinner's claim in one phrase therefore is: HIGH FREQUENCY PERFORMANCE WORLDWIDE. Spinner HF-connectors and cable assemblies are used world-wide in a large variety of communication facilities. Typical applications are mobile communication base stations, radio relay or radar installations, radio and television transmitter stations, or in medical technology.

Related Blog messages

  • SPINNER Active in NGMN Task Force on 4.3-10

    NGMN has created a 4.3-10 task force with the goal of introducing the new 4.3-10 connector system to the market. SPINNER is an active member of this task force, in which it is drawing on the experience it gained while helping to develop and roll out 4.3-10 to energetically support this NGMN initiative.

  • Spinner New Fiber Optic Rotary Joints Brochure

    The new SPINNER Rotating Solutions Fiber Optic Rotary Joints Brochure showcases some major design advancements in the SPINNER Single and Multichannel portfolio. The new single-channel SPINNER FORJ 1.14 comes with an outer diameter of just 14 mm, specifying a < 1.0 dB insertion loss.

  • SPINNER Low PIM Switches

    There are zillions of switches out there. But when it’s about low PIM testing, the available options boil down to just a few. And if you want to use a switch in a calibrated test system and need it to keep working perfectly through hundreds of thousands of cycles without requiring any maintenance, there is really only one choice: the SPINNER low PIM switch.

  • Spinner - Success With Precision

    Wherever possible, SPINNER relies on precision, highly-integrated components, which combine many functions and are made up of minimal parts, thus minimizing the number of connections. This technology allows very good insertion loss values to be achieved, as a lower num-ber of transition resistances also arise at the connections which have been reduced to a minimum. But the main advantage is that the precision increases due to the lower number of fits, meaning the produced components can be created in good compatibility with the simulated geometries.