Electronic Components Solutions

Quick delivery of a flexible modular connection for Compact PCI

Quick delivery of a flexible modular connection for Compact PCI

Customers have a strong need for back-plane wiring which provides them flexibiliy, speed and reliability. Solutions are available for IEC 60603-2, IEC60917, VME/Compact PCI, Open VPX/VITA-46. There are standard modules available with MIL Spec hook-up wires, Parallel paired cables, 50 and 100 Ohm coax and a choice of training end terminations. You have a choice of popular wire types, length's en pin-outs. ALl sub-modules are 100% electrically tested. Ready to crete your custom interface cable.

    Module selection

  • For your connector you can select 3 types of wafers: 1x8 + 2 1x5 + 2 1x5 + 2 Right Angle As an example you can e.g. select a 5 contact + 2 Shield connections wafer. You can stack a maximum of 25 wafers of this type, giving you a 125 signal connector. Secondly you can selec the cable you would like to use Coax, Twin-ax, Hookup, LSZH which gives you the possibility to go for speed or power. The termination on the second side can be selected from all Popular connectors. To give you an idea you can create a 19 stack 1x5 with Quad-ax & cat5e wire to RJ45 & 38999 connectors

  • 2.0 Module Customization

  • You can connect the connector to all Popular Connectors, with your selection of cable, you can choose the sleeving and shielding of your assembly. If needed you can use a straight or right angle type of connector and add Ferrite beads. You can connect your connector to RJ45, USB, Bayonet Circular and Ring terminals. This gives you the ultimate connectionflexibility in your systems

  • Lead times

  • Since you have a wide selection of modules availlabl of the shelf you can build your connection immediately off the shelf or with a lead time of 1-2 weeks (Europe). You can request build the connector yourself or ask for a custom build solution based on your spec. This gives you the flexibility to have a solution even for small MOQ's and comple cables

  • Main Advantages

  • Flexible
  • Short lead time
  • Reliable

Related Solutions

  • High-End Test modules with connection solution based on elastomer and gold wire

    Verification and characterisation testing for small series is mostly related to high cost and lack's flexibility. For each device expensive test boards and adapters are needed. The Steered Goldwire/Elastomer interconnection technology gives you a solution which is easy to use and flexible. Test adapters can be made in 2-3 weeks time and for the enigineer the electrical influence is close to zero. The application area is board to board, flex to board, sensor or device to board, etc. The method is suitable for industrial, medical, military, T&M application especially in the prototyping and 0-series phase.


  • Harsch Environment use the Ruggedized Connector Solutions from SteeRED

    SteeRed can offer almost any connection solution with can withstand the heaviest miitary environment. Cable assemblies can handle the standard IP67 with temperatures to 175 degrees Celsius. Connectors can hanlde 500 mating cycles, 5000 hour salt spray and numerous other requirements that you might need.

  • SteeRed - Connecting wire to board with miniature RF Connectors

    RF connectors are nowadays used in all type of applications. The antenna connections for wireless LAN Antenna's, Antenna connections in your smart phone. But also for the larger antenna connection e.g. in your Notebook, gaming device or access point. SteeRed can provide you with RFGEN1 to RFGEN4 connectors with a possible switching option. As an addition to this technology spring fingers and shield recepatables are available for connection of cans, boxes and plates.


  • SteeRED technology

    steeRED Technology founded by experienced industry professionals is an interconnection (sub-)system development and supply company.  

    Interconnection Concept development and product design are the key factors for innovation and leadership in interconnection segment but also flexibility in the supply chain combined with tailored logistic solutions are key to remain competitive. Customers need to find a way to balance decreasing time-to-market, increasing customer requirements with flexible supply chain needs.

Related Blog messages

  • SteeRED's "ShortRED" Industry Jumpers / Shunts

    SteeRED's "ShortRED" Industry Jumpers / Shunts are economical and easy to use in all applications. In electronics and particularly computing, these conductors are used to close, open or bypass part of an electronic circuit. They are typically used to set up or configure printed circuit boards.

  • SteeRed, do you need USB (3.1) Type C with ruggedized performance?

    To connect EFBs or other information devices and terminals its easy if one can make use of the USB standards. However when connecting subsystems there is a need for a rugged IO panel feed through capable of carrying USB 3.1 Type C signals and allow USB power delivery. The solution? Use Hercules size 13 or size 17 high speed connectors with USB pigtails.