Power Conversie & KMT

You work with power applications and need to supply, convert, or measure electronic power. Heynen works together with first class manufacturers of power supply, power conversion, UPS and measurement systems that can be applied to fulfil your project goals.

Solutions

  • Mantelfout kabel onderzoek set
    Mantelfout kabel onderzoek set

    Test- & Storings onderzoek aan mantel-fouten in Energie netwerken.
    Een modern systeem gecombineerd met analoge weergaven ( meters ) voor het opsporen van mantel fout storing aan kabels.

  • Rectiverter (Rectifier and Inverter in 1)
    Rectiverter (Rectifier and Inverter in 1)

    RECTIVERTER!!!

    Rectifier & Inverter in one box
     
    Heynen BV is proud to present the Rectiverter.

    Built on HE technology from the Flatpack2 HE rectifier family the Rectiverter 230/1500 48/1200 provides backed up power for 230 VAC loads with minimum losses and footprint.
     
    It is a 3 port device capable of charging the 48V battery and simultaneously provides power for the AC and DC loads.

    During mains outage the Rectiverter feeds AC loads using energy stored in the battery.

  • Modular DC loads ELR5000M
    Modular DC loads ELR5000M

    The new series EA-ELR 5000 was designed to configure a multi-channel electronic DC load. In a rack for 19” systems, up to ten DC load units with 320 W nominal power each can be installed. The modular units operate separately from each other, but require the rack as it contains the energy recovering DC-AC inverter.

    The modules are also extendable. Parallel connection on the DC inputs of the module is possible.

    The load modules come in two voltage variants, 80 V and 200 V, and incorporate the common regulation modes constant voltage (CV), constant current (CC) and constant power (CP).

    The energy recovery function inverts the supplied DC energy into a synchronous sine current and feeds it back into the local grid. This reduces the usual heat dissipation to a minimum and saves energy costs at the same time. The colour TFT touch  panel offers an intuitive kind of manual operation.

    Equipped with an Ethernet port by default, the load units can be easily integrated into a network of LAN devices. External control is possible via an included Windows software or via custom applications created in LabView or other IDEs. The commonly known communication protocols SCPI and ModBus are supported.

     

More...

Blog

  • Eltek launches Flatpack S 2U system
    Eltek launches Flatpack S 2U system

    The Flatpack s 2U system is small and power dense, making it suitable for most cabinet types. Push-in front connection, pluggable breakers and rectifiers gives flexibility and in combination with the more advanced Smartpack S Controller ensures a safe, reliable and environmental friendly operation.

    This system is in many cases the perfect replacement product for the trusted Minipack 2U system, offering more flexibility and a higher maximum output. The Flatpack s 2U system can deliver up to 9kW, in comparison to 4,8 kW with the Minipack system. - See more at: http://www.eltek.com/detail.epl?cat=28971&id=2562787#sthash.FwWcapEr.dpuf

  • Heynen joins Dutch Power
    Heynen joins Dutch Power

    Dutch Power successfully connects enterprising players in the energy sector. Together the members share knowledge and initiate technological innovation. Dutch power creates the platform for this interaction, giving an impulse to energy professionalism in The Netherlands.

  • POWERMASTER Unit PM S 1002 is integrated in the MATRIX system on the Highway in the Netherlands.
    POWERMASTER Unit PM S 1002 is integrated in the MATRIX system on the Highway in the Netherlands.

    The POWERMASTER series is built up in a reliable 19-inch-technology. The UPS systems are equipped with a fan control unit, connected to the output of the UPS, and with a so-called PFC (Power Factor Correction) that ensures sinusoidal power consumption.

More...

Suppliers

Events

More...