Electronic Components Blog

Wednesday, 18 February 2015 14:15

Polymer Aluminum Electrolytic Capacitors rated for 200V

Jianghai Electrolytic Capacitor Radial Snap-in Screw

For the first time, Jianghai Europe presents polymer aluminum electrolytic capacitors with industry leading rated voltage of 200V! The polymer capacitors are available in both SMT and radial leaded styles and comprise extremely low ESR values ranging from 5 to 100 mΩ across the entire operating temperature range, and life time up to 5.000 h at 105°C and 1.000 h at 125°C. Samples are available upon request.

Related Solutions

  • Aluminum Electrolytic Capacitors vs. Film Capacitors

    The progress in semiconductor design sets the trend in current and future devices of power electronics: it manifests itself particularly in smaller dimensions, as well as in higher voltages and switching frequencies. Referring to intermediate circuit capacitors, this trend leads to aiming at higher energy densities and larger current loads, and – at the same time – decreasing space.

    Under these conditions, especially aluminum electrolytic capacitors and plastic film capacitors offer advantageous solutions. Jianghai has both technologies in the production program and this article gives an overview on the major differences between aluminum electrolytic capacitors and film capacitors.

  • Prudent use of electrolytic capacitors in vibrating applications

    The use of electrolytic capacitors in vibrating applications like motor controllers or power tools, must be considered very carefully regarding specific criteria.
    When you're designing electronic control applications or drives, you have to think about specifications like higher power and miniaturisation.
    If you're designing vibrating applications however, you should not forget to think about vibration resistance and temperature!

  • Miniaturization of HV applications: a solution for every Power Electronics Engineer

    StackiCap™ has been set to revolutionise the world of large, HV(200V – 2kV), X7R Multilayer Chip Capacitors (MLCCs)!

    It dramatically increases the max capacitance values within a size/voltage or can reduce chip sizes. They take up 1/10th of the current footprint dimension and save up to 9/10th of the weight of a stacked cap. The advantages are spectacular on any HV products where pcb space is at a premium and max. capacitance is required in a smaller footprint. Typical applications include power supplies, projector modules, lighting systems and throughout the aerospace sector.

Supplier

  • Jianghai

    Jianghai's product range comprises aluminum electrolytic capacitors in screw terminal, snap-in and radial leaded styles. In 2012, the product portfolio was complemented by a range of power film capacitors. For this new business unit, Jianghai also follows the strategy of vertical integration and thus the production will extend from the preparation of the plastic film to the assembly of the finished goods.

Related Blog messages

  • Ceramic Technology offer 10nF Safety Certified MLCCs

    MLCC’s have been used in automotive applications for years, but the big change being seen is the voltage rating and size of components now being used.  This new revolution in MLCC technology, used in control electronics, is being driven by modern on-board charging systems - PHEV & EV where mains ac is involved.  Knowles brand Syfer has responded to demands by increasing its range of 250V ac X1/Y2 Safety Certified capacitors to 10nF.

  • Knowles Capacitors update

    In 2014 Dielectric Laboratories (DLI), Novacap, Syfer Technology and Voltronics came together into a single organisation, Knowles Capacitors. With a combined history exceeding 175 years, and operating as a division of Knowles Corporation of USA, Knowles Capacitors was a merging of some of the world’s leading speciality capacitor manufacturers. The Precision Devices division of Knowles is a $200m+ global manufacturer of precision capacitors, components and crystal oscillators.

  • IPDiA's Broadband Silicon Capacitor (BBSC) Product Line at 40 GHz

    The BBSC capacitor series from IPDiA provide superior broadband performance, stability and reliability for all broadband optoelectronics and high speed data systems. They provide broadband performances better than 0.4 dB of insertion loss up to 40 GHz, as well as very high stability of the capacitance over temperature (50 ppm/°C), voltage variation, and are highly reliable.

  • Knowles New "HiT" High Temperature Ceramic MLCs

    Knowles capacitor brands Novacap and Syfer Technology jointly announce the launch of a new range of high temperature MLC chip capacitors. The "HiT" range of MLCCs has an operating temperature range of -55 to +200ºC and are suitable for a variety of high temperature applications and offer tin over nickel terminations – not previously available.