Electronic Components Blog

Monday, 02 July 2012 13:50

Planning in-building projects in iBwave with SPINNER products

Planning in-building projects in iBwave with SPINNER products

The planning tool from the Canadian company iBwave has successfully established itself almost all over the world as the standard for planning in-building projects. Using this the network coverage in buildings can be calculated in a whole variety of ways and the capacities can be planned in advance. For realistic simulation the iBwave product database provides direct access to products by all reputable manufacturers.

All current SPINNER MNCS® products like filters, diplexers, triplexers and multiplexers can be used for in-house planning. In addition, there are also the components for coaxial distribution networks in buildings, such as splitters, tappers and couplers as well as resistors, attenuators, jumpers and connectors. The components can be directly downloaded from the iBwave online database or sent to you on request. This means it is now possible for network operators, planning offices, installation companies, integrators and system technology manufacturers to use high quality SPINNER RF products throughout from planning to system operation. We would be delighted to be able to support you with the modelling of customised MNCS® systems for complex multi-operator sharing systems.

Related Solutions

  • Broadband Network Operator? SPINNER Antenna Monitoring System!

    As a broadband network operator, you need to rely on your systems to deliver content to your subscribers. Early or even premature failure detection is key in preventing downtime and or outage. Spinner’s AMS is engineered to detect flaws in broadcast transmission infrastructure, and alert you to the problem before the damage is done.

  • Spinner 4.3-10 for next-generation mobile comms

    Spinner has teamed up with other leading vendors to define the next generation connector system for the mobile communication industry

    The new 4.3-10 connector system can be installed without tools, and is therefore available with screw, hand-screw and a push-pull coupling mechanism.

    The 4.3-10 connector has a very compact design which allows equipment manufacturers to have a higher connector density on their devices with a performance up to 500W at 2 Ghz.

    Spinner has developped a wide 4.3-10 portfolio  based on their high quality standards providing their customers with the best possible connectivity, optimized and failure free installation, even under the toughest environmental conditions 

     

  • SPINNER MNCS® - Mobile Network Combining System

    For the multiple use of outdoor antenna systems and for in-house coverage it is necessary to combine signals from mobile communication base stations of several operators and networks in the frequency range from 380 to 2,500 MHz. For these purposes SPINNER offers individual components as well as complete, fully tuned and ready-to use systems called POI (point of interconnection).

Supplier

  • Spinner

    The SPINNER Group has been setting standards with its RF technology products for more than 65 years. Spinner's claim in one phrase therefore is: HIGH FREQUENCY PERFORMANCE WORLDWIDE. Spinner HF-connectors and cable assemblies are used world-wide in a large variety of communication facilities. Typical applications are mobile communication base stations, radio relay or radar installations, radio and television transmitter stations, or in medical technology.

Related Blog messages

  • SPINNER Active in NGMN Task Force on 4.3-10

    NGMN has created a 4.3-10 task force with the goal of introducing the new 4.3-10 connector system to the market. SPINNER is an active member of this task force, in which it is drawing on the experience it gained while helping to develop and roll out 4.3-10 to energetically support this NGMN initiative.

  • Spinner New Fiber Optic Rotary Joints Brochure

    The new SPINNER Rotating Solutions Fiber Optic Rotary Joints Brochure showcases some major design advancements in the SPINNER Single and Multichannel portfolio. The new single-channel SPINNER FORJ 1.14 comes with an outer diameter of just 14 mm, specifying a < 1.0 dB insertion loss.

  • SPINNER Low PIM Switches

    There are zillions of switches out there. But when it’s about low PIM testing, the available options boil down to just a few. And if you want to use a switch in a calibrated test system and need it to keep working perfectly through hundreds of thousands of cycles without requiring any maintenance, there is really only one choice: the SPINNER low PIM switch.

  • Spinner - Success With Precision

    Wherever possible, SPINNER relies on precision, highly-integrated components, which combine many functions and are made up of minimal parts, thus minimizing the number of connections. This technology allows very good insertion loss values to be achieved, as a lower num-ber of transition resistances also arise at the connections which have been reduced to a minimum. But the main advantage is that the precision increases due to the lower number of fits, meaning the produced components can be created in good compatibility with the simulated geometries.