Network Monitoring and Analysis Solutions

WiFi Troubleshooting with full spectrum analyzer

WiFi Troubleshooting with full spectrum analyzer

The WX150 test set is a compact and lightweight addition to the WiFi Air Expert family. It provides all the tools necessary for WiFi networks discovery, survey, optimization, performance testing and troubleshooting in a compact form factor.

    Platform Highlights

  • - Supports detection and connection to 802.11a/b/g/n/ac devices - Discovers networks and lists Access Points, Clients and Channels in table and graphical format - AP detailed capabilities discovery including SSID, BSSID channels, security, supported data rates, signal and noise levels, co-channel and adjacent APs and associated clients - Survey coverage problems with signal and noise levels tracking - Analyze Channel usage by utilization and number of APs - Discover associated and non-associated WiFi clients present in the network - One button Auto-test evaluates the health of the WiFi network with analysis of security, coverage, inteference, top talkers and connectivity with configurable AP list - Connectivity testing with DHCP connection to APs, Ping, Trace Route and ARPWiz - Verify network performance with dual ended V-perf Upload/Download troughput testing - Optional Ethernet 10/100/1000-T and 1000-X ports to verufy end-to-end throughput performance - Ethernet connectivity and PoE testing -Optional dual band 2.4GHz and 5GHz spectrum analyzer to easily discover and identify WiFi and non-WiFi inteference

  • Troubleshoot your Network

  • WiFi Spectrum Analyzer With the 2.4 GHz and 5 GHz RF frequency bands open for unlicensed use, WiFi's frequency bands are available for anyone to use. The 2.4 GHz frequency band is popular and crowded. It is used by many common RF emitting devices including cordless phones, bluetooth, zigbee, baby monitors wireless audio or security systems. All of these devices constitute sources of non-WiFi inteference. They emit frequencies either on a single narrow frequency range like Zigbee, or frequency hopping across the entire spectrum, like bluetooth, or continuously emitting across the entire spectrum, like a microwave oven. These inteferers do not follow WiFi protocol rules, so inteference can start while WiFi devices are in the middle of a transmission and last for an unknown duration. Many highly disruptive and intermittent WiFi performance issues can be traced to non-WiFi inteferers. But unless technicians are armed with a specialized spectrum analyzer, they will be powerless in detecting these inteference sources since traditional WiFi network scanning tools can only discover 802.11 WiFi devices. The Air Expert offers a dedicated spectrum analyzer that displays all RF activity -WiFi AND non-WiFi inteferers- in the 2.4GHz AND 5GHz bands. The spectrum Analyzer view allows technicians to visualize inteference sources overlapping with the AP under test. The WiFi intelligence library can also be used to identify inteference signaturs against a list of known inteferers (s.a. cordless phones, Zigbee, Bluetooth etc)

  • Automate testing

  • Auto Test Function The Air Expert Auto Test function provides an automated, reliable and repeatable installation routine. With configurable test profiles for consistency and test results clearly marked with Pass, Fail or Warning status, technicians are provided with an easy-to-use and comprehensive site assesment routine.

  • Main Advantages

    PoE test (also PoE voltage)
  • IP tools
  • RJ45 ethernet interface
  • Remote access
  • Reporting
  • V-Perf troughput testing

Related Solutions

  • FX150+ OTDR VeEX

    Featuring up to 256,000 Data Points and 3 cm resolution, the new enhanced FX150+ mini OTDR from VeEX offers superior measurement accuracy for installation, maintenance and troubleshooting of FTTx, Mobile FrontHaul/BackHaul and Metro fiber networks. The compact, lightweight platform incorporates power meter, light source, fiber inspection probe and VFL test options which add exceptional versatility to the unit.

  • Handheld DOCSIS 3.1 Installation Test Set - CX310

    Suitable for every Installer Technician

     

    The CX310 is a lightweight, ultra-portable, low-cost meter equipped with a DOCSIS 3.1 Cable Modem. It supports true OFDM analysis and VeTest troughput measurements. Key SLM features include Single Channel, VeCheck Full Band Scan and Ingress Scan.

     

  • Looking for an ethernet performance measurement tool?

    Are you frustrated with the performance of your Ethernet platform? Are your network properly constructed, installed and designed for reliable Ethernet services?

    If you are responsible for answering these difficult questions or have you been asked these questions from the management? Then you are looking for an Ethernet test solution. With the press of a button you can start an entire test suite such as BER testing, round trip delay or a complete automated test suite. Portable test equipment enables field technicians, installers and contractors to immediately capture test results and demonstrate that the Ethernet service meets the customer SLA.

    These tests can also serve as a performance baseline for future reference.

  • Snel en betrouwbaar fusielassen

    U maakt in verschillende omstandigheden fusielassen; in pop locaties tussen de rekken maar ook buiten tussen het zand en de modder. Deze lassen moeten snel maar vooral betrouwbaar worden gemaakt. Bovendien spelen kosten een belangrijke rol en de aanschaf van een fusielasapparaat is een grote uitgave.

Supplier

  • VeEX

    VeEX develops next generation communication equipment. Based in the heart of Silicon Valley, VeEX provides innovative solutions for next generation networks. VeEX core expertise and product lines range from DSL, Broadband and Cable TV to Metro and Next Generation Transport Networks. The VeEX team brings simplicity to tomorrow's networks.

Related Blog messages

  • IXIA BeNeLux partner training

    IXIA Benelux Partner Support. In dept technical training at Heynen offices. Getting to know all aspects from IXIA Network Packet Brokers, Taps, Bypass switches providing single pane of glass for Deep dive in Testing Solutions for IP Networks, Network Security, VOIP, VOLTE, VoWiFi, NFV, SDN, SD-WAN, EPC, vEPC, IMS, 3G+4G+5G,
  • IXIA Cloudlens Delivery

    A large number of Ixia Cloudlens Network Packet Prokers are delivered into Belgium end of December 2017. These will provide full network visibility across the public, private, and hybrid clouds from an undisclosed tier one customer. Both IXIA and Heynen are looking forward to support this important project.
  • Network visibility for dummies

    Bij het ontwerpen van enterprise security omgeving gaat de aandacht vaak uit naar de mogelijkheden en functies van security- en monitoring applicaties. Maar net zo belangrijk is het om deze tools van het juiste netwerkverkeer te voorzien. Want je kunt je allen beveiligen tegen wat je ziet. Dit E-book beschrijft hoe je een effectieve security architectuur voor je netwerk bouwt.
  • Fluke Networks appoints Heynen as Premium Advantage Partner

    Fluke Networks is making some organizational changes to better serve the Dutch enterprise market.

    In order to continue to best serve the Dutch Enterprise market, it is with great pleasure to hereby introduce our new distribution partner, Heynen. Starting today Heynen will represent Fluke Networks’ Enterprise Network Analyser Solutions on the Dutch market. This includes the Etherscope, Network Time Machine and of course the popular OptiView XG product families.