Network Monitoring and Analysis Blog

Friday, 29 March 2019 08:52

AEM TestPro CV100 Multi-gig Link Speed Qualification SNR/BERT

AEM TestPro CV100 Multi-gig Link Speed Qualification SNR/BERT

AEM TestPro CV100 validates a cabling link for high performance Ethernet standards including 1 / 2.5 / 5 / 10GBASE-T. End-to-end Signal to Noise Ratio (SNR) measurement provides a quick and objective assessment of link performance under network load condition. The Autotest feature of the TestPro is the easiest way to ensure that a cabling link will the desired network rate.

Wireless access points (APs) are one of today's most broadly deployed IoT devices and 802.11ac Wave 2 wireless APs require 2.5 and 5 GigE backbone speeds to run at maximum performance. Additionally, these devices can be PoE powered and by the nature of the link speed, require all four pair to be terminated.

The TestPro CAT5e through CAT8 testfunctionalities incorporate:

- Certify the cabling infrastructure in accordance with TIA / ISO standards.
- Verify link speed and quality with SNR + BERT testing in accordance with IEEE 8023.bz specific to 1 / 2.5 / 5 / 10GigE.
- Verify loaded PoE++ in accordance with IEEE 802.3bt to 4 pair 90W including DC resistance (unbalance) measurements.
- The capability to test single pair Ethernet cables as long as 1,000 m (1 km) down to 100 kHz (0.1 MHz).


AEM is a member of the NBASE-T Alliance, to learn more visit https://www.nbaset.org/technology/

 

For more technical information or sales contact Continue Here or call +31 (0)485 55 09 09

HEYNEN

Related Solutions

  • AEM TestPro CV100

    Able to support up to 3GHz frequency range, and testing all mode combination parameters (including TCL, MPTL, NEXT). AEM TestPro exceeds the ANSI/TIA-1152-A Level 2G category 8 accuracy specifications for copper certification testing. This translates to Cat 6A Certification in 6 seconds!

Supplier

  • AEM TestPro

    AEM’s test and measurement solutions include the TestPro Multifunction Cable Tester, a ruggedized and versatile solution designed for field use offering a unique test set that is purpose built to aid in deploying and troubleshooting the digital infrastructure. AEM also offers the Multi-port Vector Network Analyzer (MMVNA) small form factor solution designed for use in manufacturing where qualification of cabling and connectors such as those used by the Automotive industry and Industrial Automation are needed. These solutions were designed and developed by a team with more than four decades of test and measurement experience to draw upon, giving rise to disruptive innovations and several industry firsts at a fraction of the cost of older technologies.