Electronic Components Blog

Friday, 17 January 2014 14:09

LI Reed Relays

LI Reed Relays

Description

The LI series reed relay is an ultra miniature high voltage relay series design in a PCB through hole package, capable of switching voltage up to 1kVDC and breakdown voltage up to 5kVDC.

Features

  • Smallest possible housing
  • Space saving package
  • High insulation resistance available >10TΩ
  • Insulation voltage between coil and contact up to 7 kVDC

Applications

  • High voltage test systems
  • Cable and in-circuit test equipment
  • Battery operated high voltage test equipment
  • change-over switch in photovoltaic applications
  • electro vehicles

Specifications

  • Coil Voltage (VDC) 5 to 24
  • Coil Resistance (Ohm) 200 to 3600
  • Contact Form 1A
  • Rated Power (W) 0 to 100
  • Switching Voltage (VDC) 0 to 1000
  • Switching Current (A) 0 to 1.0
  • Carry Current (A) 0 to 2.5

Breakdown Voltage (VDC) up to 5000

Related Solutions

  • Planar transformers and inductors design guide

    When designing a switching power supply or DC/DC converter and your willing to reach the best possible efficiency of your application, than it's most common to use a planar transformer instead of an equivalent wire wound transformer design. Standex-Meder manufactures planar transformers for these demanding applications and you can rely on decades of experience. When failure is not an option, designers of critical electronic components rely on the engineers of Standex-Meder and the local support of Heynen BV.

  • Atex Optocouplers

    Are you looking for a-save way for galvanic seperations between input and output circuits?

    Standex Meder offers you a possible solution by using Atex Optocouplers for intrinsically citcuits. These optocoupler series are tested and certified for extreme/harsh environments such as potentially explosive atmospheres so they will not become an ignition point when subjected to short circuitsor adjacement component failures.

     

     

  • Ultra miniature Reed Relay allow closely stacked matrices

    At nearly half the size of the standard MS series, the new UMS Relay Series from MEDER measures only 9.5 x 3.6 x 6.85mm. Though nearly 50% smaller, the UMS relays offer the same electrical characteristics as its larger SIL relay equivalent.

  • Reed switch with a high quality solution for a wide range of applications!

    High quality for a wide range reed switch:

    Standex-Meder Electronics announces the GR400 Series miniature reed switch. This 10mm reed switch provides a low-cost solution for a wide range of applications, including counting, end limit detection, low power devices, movement or position detection, and presence, proximity, rotation, or speed sensing. These applications span many industries: aerospace, automotive, HVAC, test and measurement, security, and more.

  • E-Car Isolation measurement

    Is development of hybrid cars or E-Cars your working area and are you still struggling to isolate the high voltage levels up to 400V from the typicaly used voltages of 12V/24V and to ensure the passengers are isolated as well. Meder Electronic is able to offer you the perfect solution.

Supplier

  • StandexMeder

    Standex-Meder Electronics is a worldwide market leader in the design, development and manufacture of standard and custom electro-magnetic components, including magnetics products and reed switch-based solutions. Our magnetic offerings include planar, Rogowski, and low-and high-frequency transformers and inductors. Our reed switch based solutions include Meder, Standex and OKI brand reed switches, al well as a complete portfolio of reed relays, and a comprehensive array of fluid level, proximity, motion, water flow, HVAC condensateo, hydrailic pressure differential, capacitive, conductive and inductive sensors.

Related Blog messages

  • Standex Meder's Customer Focused Sensing Technologies

    Standex Meder's custom engineered solutions, using the appropriate advanced sensing technology to meet customer demands. Versatile engineering expertise in magnetic sensing technologies and custom packaging, allows Standex Meder to be a one-stop-shop for your sensing requirements.

  • Reed Sensors in Mobility Equipment and Hospital Beds

    Reed Sensors Are Ideal for Sensing so called "End Positions" On Hospital Beds And Other Mobility Equipment eg; motorized chairs, special lifts for bath tubs, massage chairs, etc. all require end position detection. Since all these can be operated by the consumer, care needs to be taken to use low power switching devices, thus eliminating the threat of electrical shock to the user. Also dust, dirt, and moisture may be present, with potential spillage occurring. All of the aforementioned could create faulty operation of switching devices. Mechanical limit switches have been used in the past, but can fail prematurely, because they require higher switching power to operate properly.

  • Portable Defibrillators Use Reed Relays

    Reed relays are reliably used in portable battery operated defibrillators. Instruments that directly save lives require the best possible designs, and must use the most reliable components available. Portable defibrillators are designed so that anyone can pick up and use them with no prior experience. They are only used for emergencies in life and death situations.

  • Toroidal Powertransformers Protect Sensitive Medical Devices

    Protect Sensitive Medical Devices in Patient Care Environments. New toroidal power transformers from Standex-Meder Electronics protect sensitive medical devices including those used in patient care environments. Available as bare toroids which can be integrated into the devices themselves or as toroids housed in enclosures with circuit breakers, fused input, plug-ins and other user-friendly options. Compliant with UL/IEC 60601 specifications, these transformers feature extremely low leakage current between primary.