To do so the engineer like to do an quick check of the speaker set-up by generating an noise signal to the speakers.
With the selector switch our engineer can switch between 3 speaker sets. The required level difference between the speaker-sets can be adjusted separate, so all sets respond as loud.
Now we can drive the audio to the speakers coming from analog domain inputs or digital AES/EBU inputs.
Easy Ghielmetti connectors can also be used to input audio to this monitor system direct from the “Patch panel”.
LEDs showing VU level in a bar. Switches on the rear provide the following scales and modes: DIN, Nordic, BBC, 'Digital' scales; 'Peak, fast mode' shows each sample, 'peak only' shows the peak value in 'hold' mode, 'level only' shows just the level, 'peak and level' shows the level as well as the peak value.
The front panel has two grilles for the inbuilt monitoring speakers
Ghielmetti monitor solution GMS 2120, an must have for mastering studio.
Product description:
Quick check of 3 individually select-able outputs to active speakers
White and Pink Noise generator
Phase and level indicator for 2 channels (L, R)
Monitoring router 3x1 for analog and 4x1 for digital inputs
24 Bit AD/DA converter for analog and digital channels
Monitor signal simultaneously on analog and digital output available
Sample Rates: 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz
High performance loudspeakers
Headphone output with volume and balance control and
switchable 40dB pre-amplification for microphone signals
RS-485 remote interface to remote control unit