Electronic Components Blog

Monday, 04 February 2019 15:24

Components overview

Please find below an overview of the components we can deliver.

For more info, please contact us. 

Related Solutions

  • ASM01, a single SMD connector or miniature board-to-board connector

    Ever had the experience of designing a miniature electronic application with more than one PCB? For example a LED light? Then you must have had a challenge in connecting these PCBs in this compact casing to another! And... are you happy with the chosen board-to-board connection?

  • Space Grade RF, Coaxial And Waveguide Switches? Dow-Key!

    Whenever you work with space grade RF, coaxial and waveguide switches, and need high reliability solutions that can withstand the severe environments space imposes on complex systems...Dow-Key is confident in providing these solutions with decades of experience and knowledge.

  • Atex Optocouplers

    Are you looking for a-save way for galvanic seperations between input and output circuits?

    Standex Meder offers you a possible solution by using Atex Optocouplers for intrinsically citcuits. These optocoupler series are tested and certified for extreme/harsh environments such as potentially explosive atmospheres so they will not become an ignition point when subjected to short circuitsor adjacement component failures.

     

     

  • Read your sensing elements directly by using the Smartec UTI

    The Universal Transducer Interface (UTI) is a complete analogue front end for low frequency measurement applications, based on a self-calibrating period-modulated oscillator. Sensing elements can be directly connected to the UTI without the need for extra electronics. Only a single reference element, of the same kind as the sensor, is required. The output is digital and can communicate with any type of micro-controller.

    The UTI provides interfacing for all kind of resistive and capacitive sensors.

Supplier

  • Smartec

    Founded in 1987, Smartec B.V. was established out of a laboratory concept.
    A temperature sensor, with digital output, was developed at the Delft University of Technology (TUD), Netherlands. This sensor has proved to be more accurate and stable than any other digital temperature sensor on the market.
    Through research and development initiatives, the Smartec product range has been further enhanced with the introduction to market of the humidity sensor, infrared sensor, Universal Transducer Interface (UTI) and a complete line of pressure sensors in the range of 0.01 PSI until 300 PSI.
    Over the years Smartec has built up strategic alliances with top rated semiconductor companies in Europe and the Far East. These alliances have led to long-term partnerships, excelling in close cooperation in research and development, with the most accurate and stable sensors in nowadays market as a result.

Related Blog messages

  • Spinner - Success With Precision

    Wherever possible, SPINNER relies on precision, highly-integrated components, which combine many functions and are made up of minimal parts, thus minimizing the number of connections. This technology allows very good insertion loss values to be achieved, as a lower num-ber of transition resistances also arise at the connections which have been reduced to a minimum. But the main advantage is that the precision increases due to the lower number of fits, meaning the produced components can be created in good compatibility with the simulated geometries.

  • RJ45 PC board plug allows cableless pluggable connections

    RJ45 connections are all-round connections for more than 30 years. They are found in the telephone and data network connections of buildings and the home network. The connection to the RJ45 jack of a device is done in all these applications by a RJ45 plug with connection line.

    However, applications exist where it is necessary to interconnect two or more parts of the device by RJ45.