Electronic Components Blog

Tuesday, 16 May 2017 06:16

Current measurement system designed for high dielectric strength

Current measurement system designed for high dielectric strength

IVT-S: Designed for high dielectric strength in traction batteries and stationary energy storage devices

With its newly developed, shunt-based IVT-S measurement technology, Isabellenhütte is responding to the market, which now favours specified functions in current measurement systems. The main focus is on achieving dielectric strength that is as high as possible in line with the intended application. High dielectric strength must be guaranteed in battery-powered vehicles, for example.

To this end, Isabellenhütte is now introducing the IVT-S. The measurement system has a maximum dielectric strength of 1,000 volts. Its functional range includes the measurement of current and voltage. Isabellenhütte thus meets today’s market requirements of traction battery systems or stationary, electrical energy storage devices. These lithium-ion batteries generate high energy density at which higher voltages can be applied with smaller currents. This is why the sensor’s dielectric strength also has to be correspondingly high − a key quality feature that distinguishes IVT-S from competing products. For fast-charging battery systems, this performance feature is extremely important.

A variety of components are used in the IVT-S. A 16-bit AD converter guarantees the precise transformation of the voltage drop into digital signals. Data is transmitted through a CAN 2.0 interface. Through this module, the internally developed current counting firmware is provided with information on charge and discharge volumes. In addition Isabellenhütte provides a CAN description file
in *dbc format that helps IVT-S users to swiftly integrate the application.

Related Solutions

  • Using data sheets correctly when selecting resistors

    Reading Between the Lines.
    Using data sheets correctly when selecting resistors.

    When selecting a resistor for your application, there is more to bear in mind than you might think. In order to make a preliminary choice using a product data sheet, developers need certain background information and have to calculate some dimensions themselves. We herewith show how to correctly use a data sheet...

  • Current and voltage measurement in and around hybrid and electric drives

    No matter if you're designing a hybrid, electric or fuel cell powered application - a new development's sustainability always depends on the reliability in every-day use and therefore on controlling its energy flow and consumption permanently. Not every method for measuring current and voltage is able to fulfill each of the difficult requirements. Isabellenhütte has developed the current and voltage measuring module IVT for DC applications in alternative drive concepts based on its experience in the area of car battery management.

     

     

  • Low profile braking resistor, optimized design for high energy to heat conversion

    When designing a motor controller, which has to be as compact as possible, every engineers challenge is to deal with the heat dissipation which is being generated when braking the motor. Using the BRK-series of Isabellenhütte as a braking chopper, you're able to resist high energy loads. It's ideal for use on Inverters, EV pre-charging & current limiting applications.

  • Ideal precision shunt for extreme conditions

    When you're working on the design of a power application for extreme temperature conditions and you'd like to measure voltage or current, you might run into limitations. When the internal temperature of your application is rising, the constant load capacity of your shunt decreases and the long-term stability is put to the test.

Supplier

  • Isabellenhütte

    Isabellenhütte is a company rich in tradition. Its roots stretch back over 500 years in metal melting and processing. Today it ranks among the world's leading manufacturers of alloys for thermocouple, resistance alloys as well as low-impedance precision and power resistors, and is setting standards in the sector of precision measurement

Related Blog messages

  • ICD-A: Automotive Measuring System for Even the Smallest Spaces

    The latest product development in measurement technology from Isabellenhütte is a compact current measuring module. The shunt-based ICD-A system has a sealed six-pole MCON connector, which is commonly used in the automotive industry. It protects the signal and power transmission from external influences. With transmission rates of up to 1 Mbit/s, the connection provides digitised data in CAN bus 2.0 format, and ensures a high level of measurement precision for its users.

  • Isabellenhütte New IPC-SII (IPC-MOD)

    IPC-SII is Isabellenhütte's newest addition in their IPC-MOD family.
    As a result of intensive dialogue between SEW Eurodrive GmbH (Bruchsal) and ISAscale®, the IPC-MOD series will now get a new product line which fulfils requirements for frequency inverters in the range from 40 kW up to 200 kW (nominal current measurement ranges from 160 A to 540 A). SEW Eurodrive GmbH is one of the market leaders in the frequency inverters for machine tools application field.